Linksys
AM300
Default IP: 192.168.1.1
Default username : admin
Default password : admin
Setting Bridge
1. Pilih Setup
2. Pilih Basic Setup
3. ADSL Settings, Encapsulation: RFC 1483 Bridged, Autodetect: Disable, VPI: 8, VCI: 81, Multiplexing: LLC, DSL Modulation: Auto
4. Pilih Save Settings
Setting PPPoE
1. Pilih Setup
2. Pilih Basic Setup
3. ADSL Settings, Encapsulation: RFC 2516 PPPoE, Autodetect: Disable, VPI: 8, VCI: 81, Multiplexing: LLC, DSL Modulation: Auto
4. PPPoE Settings: Username: (nmrspeedy@telkom.net), Password: (password speedy), Keep Alive
5. Pilih Save Settings
Readmore.........
Zyxel
P-660R
Default IP: 192.168.1.1
Default username : admin
Default password : 1234
Setting Bridge
1. Pilih Network
2. Pilih WAN
3. Mode: Bridge, Encapsulation: RFC 1483, Multiplexing: LLC, VPI: 8, VCI: 81, Apply
4. Pilih Maintenance
5. Pilih Tools
6. Restart
Setting PPPoE
1. Pilih Network
2. Pilih WAN
3. Mode: Routing, Encapsulation: PPPoE, Username: (nmrspeedy@telkom.net), Password: (password speedy), Service Name: Speedy, Multiplexing: LLC, VPI: 8, VCI: 81, IP Address: Obtain an IP Address Automatically, Connection: Nailed-Up Connnection, Apply
4. Pilih Maintenance
5. Pilih Tools
6. Restart
Readmore.........
Modem Articonet
Guide how ADSL modem settings Speedy PPPoE. (PPPoE)
The setting is done through a modem to access the browser address http://192.168.1.1 Enter the username and password: admin / admin After entering the settings menu to take the following steps:
Log in to the "Advanced Setup" and select "WAN" and click the "Edit" on the table right WAN <> Enter the value of PVC Configuration: (enter appropriate areas TELKOM value of each region)
VPI = X
VCI = XX
Service Category = UBR Without PCR, and then click the Next button
Connection type = PPPoE
Encapsulation = LLC, and then click the Next button
Enter the username and password Speedy, and then click the Next button
Mark or affection for the v option "Enable WAN Service," and then click Next and click the Save button
PPPoE connection settings for Speedy has been done
Then click the Save button / Reboot
(Modem will reboot - / 1 minute and waiting to return to normal modem)
ADSL modem settings Articonet to Dial-Up/Bridge
The setting is done through a modem to access the browser address http://192.168.1.1
Enter the username and password: admin / admin After entering the settings menu to take the following steps:
Log in to the "Advanced Setup" and select "WAN" and click the "Edit" <> Enter the value of PVC Configuration: (enter appropriate areas TELKOM value of each region)
VPI = X
VCI = XX
Service Category = UBR Without PCR, and then click the Next button
Connection type = Bridging
Encapsulation = LLC, and then click the Next button
Mark or affection for the v option "Enable Service Bridge", and then click Next and click the Save button
Setting Bridge to connect to the Speedy has been done
Then click the Save button / Reboot
(Modem will reboot - / 1 minute and waiting to return to normal modem) Readmore.........
1.Login To : http ://192.168.1.2542.
User name = admin
Password = passwordClick -> OK
3.Click : Quick Start
4.Edit Connection :
Encapsulation = PPPoE LLC
Bridge = Enabled
Setting VPI = 8 dan VCI = 81 , and Than
Static IP Setting
IP Address = 0.0.0.0
subnet mask = 0.0.0.0
Gateway = 0.0.0.0
5.Click : - Submit- SAVE CONFIG
6.Click : Submit
7.Wait Till process Configuration done !
8.Configuration Done !
Now try to Browse..!
Readmore.........
Now try to Browse..!
Shiro
Default IP: 192.168.1.1
Default username : admin
Default password : admin
Setting Bridge
1. Click Advanced
2. Click WAN
3. Click New Connection
4. Connection Name: Speedy,
Type: Bridge, VPI: 8, VCI: 81, and Submit
5. Save Settings
6. Restart Router
Setting PPPoE
1. Pilih Advanced
2. Pilih WAN
3. Klik New Connection
4. Connection Name: Speedy,
Type: PPPoE,
Sharing: Enable,
Encapsulation: LLC,
Username: (nmrspeedy@telkom.net),
Password: (password from provider),
VPI: 8, VCI: 81, and Submit
5. Save Settings
6. Restart Router
Readmore.........
TP-Link
Default IP: 192.168.1.1
Default username : adminDefault
password : admin
Setting Bridge
1. click Advanced Setup
2. click WAN
3. Find VPI/VCI: 8/81,
click Edit
4. ATM PVC Configuration,
VPI=8; VCI=81,
Service Category: UBR Without PCR, Next
5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Cheklist Enable Bridge Service,
Service Name: Speedy, Next
7. WAN Setup - Summary, Save
8. Save/Reboot
Setting PPPoE
1. click Advanced Setup
2. click WAN
3. find VPI/VCI: 8/81, click Edit
4. ATM PVC Configuration, VPI=8; VCI=81,
Service Category: UBR Without PCR, Next
5. Connection Type PPP over Ethernet (PPPoE),
Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Put your PPP Username: (nmrspeedy@telkom.net);
PPP Password: (password from provider);
PPPoE Service Name: Speedy, Next
7. Cheklist Enable WAN Service,
Service Name: Speedy, Next
8. WAN Setup - Summary, Save
9. Save/Reboot
Readmore.........
Aztech
Default IP: 192.168.1.1
Default username : admin
Default password : admin
Setting Bridge
1. Click Advanced
2. Click WAN
3. Click New Connection
4. Connection Name: Speedy,
Type: Bridge, VPI: 8, VCI:
81, and Submit.
5. Save Settings
6. Restart Router
Setting PPPoE/Router
1. Click Advanced
2. Click WAN
3. Click New Connection
4. Connection Name: Speedy,
Type: PPPoE,
Sharing: Enable,
Encapsulation: LLC,
Username: (nmrspeedy@telkom.net),
Password: (password from provider),
VPI: 8, VCI: 81, and Submit.
5. Save Settings
6. Restart Router
Readmore.........
D-LinkDSL-302T
Default IP: 192.168.1.1
Default username : admin
Default password : admin
Setting Bridge
1. Click Setup
2. Click Connection
3. Bridge Connection Setup. Name: Speedy;
Type: Bridge; Encapsulation: LLC; VPI=8; VCI=81, Apply
4. Click Tools
5. Click System Commands,
Save All, Restart
Setting PPPoE/Router
1. Click Setup
2. Click Connection
3. Bridge Connection Setup. Name: Speedy;
Type: PPPoE;
Username: (nmrspeedy@telkom.net);
Password: (password from provider);
VPI=8;
VCI=81, Apply
4. Click Tools
5. Click System Commands.
Save All, Restart
Readmore.........
Subscribe to:
Posts (Atom)
